A single-row suction shut-off valve box is a compact marine valve-chest assembly shown in Taler's customer product catalogue. The branch count, connection pattern and internal valve arrangement must follow the piping drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | Marine valve chest / valve box |
| Type | Single-row suction shut-off valve box |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Bilge, ballast, sea-water or compatible suction service; confirm actual duty |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The product image shows a fabricated or cast valve-box body with multiple service openings and handwheel-operated isolation. The source does not state the exact number of valves, nominal sizes, material, pressure class or flange drilling.
Send the suction-line schematic, old assembly photograph and mating flange dimensions. We can match the valve-box layout, access direction and drain or inspection requirements before quotation.
No. The box layout, branch spacing, body arrangement and access clearance are part of the procurement identity. Match the complete assembly drawing.
Provide the number of suction branches, nominal sizes, medium, pressure class, flange pattern, installation orientation and required documents.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.