This marine steam pressure reducing valve group is shown in Taler's customer catalogue as a complete multi-valve assembly. Select the pressure ratio, capacity, temperature and bypass arrangement from the steam-system design.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | Marine steam pressure reducing valve group |
| Type | Steam pressure reducing valve group |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Flanged inlet/outlet; dimensions and bypass arrangement project-specific |
| Media | Marine steam distribution and pressure control; confirm actual conditions |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The source title identifies a marine steam pressure reducing valve group. The product image shows a complete flanged assembly with multiple valves, a gauge and interconnected piping; it depends on inlet/outlet pressure, set point, flow capacity, temperature rating or exact trim materials.
Provide the steam conditions, design flow, inlet and outlet pressure, temperature, flange standard, bypass requirement, safety-valve arrangement and required documents. We configure the group against the approved piping and control schematic.
No. The photograph confirms the physical assembly type only. Pressure ratio, flow, temperature, bypass and safety arrangements must come from the steam-system design.
State steam medium, inlet/outlet pressure, set pressure, flow, temperature, flange details, bypass and safety requirements and inspection documents.
State the medium, inlet and outlet pressure, flow, temperature, control signal, connection and required fail position.
No. A reducing or control valve is selected by its control duty and pressure conditions, not by nominal size alone.