This marine air pressure-reducing valve group is listed in Taler's customer catalogue. Check the inlet pressure, required outlet set point, flow, air quality and connection dimensions before selection.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | Customer catalogue title; detailed standard project-specific |
| Type | Air pressure-reducing valve group |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Project-specific |
| Media | Compressed air or control air; confirm air quality and service conditions |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
A packaged reducing group can combine pressure-control, isolation and bypass components, but the exact arrangement is not established by the catalogue title or photograph. The approved assembly drawing must define the component sequence and service access.
For selection, provide minimum and maximum inlet pressure, target outlet pressure, flow range, air temperature, pipe size, connection standard and required fail position. Materials, test scope and certificates remain subject to the approved specification.
No. The set point and pressure range must be confirmed from the nameplate, project requirements.
Provide inlet pressure range, outlet set point, flow, medium, pipe connection, installation orientation and required inspection documents.
State the medium, inlet and outlet pressure, flow, temperature, control signal, connection and required fail position.
No. A reducing or control valve is selected by its control duty and pressure conditions, not by nominal size alone.