JIS KS91A-121 is the marine air pipe head listed by Taler for 50A–80A pipe sizes. It is used as a tank-venting procurement identity; the tank duty, body material and internal protection arrangement must be matched to the drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS-KS91A-121 |
| Type | Marine air pipe head |
| Nominal size | 50A–80A |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Bottom flange shown; pipe connection and deck fixing detail project-specific |
| Media | Tank venting service; tank medium and protection arrangement project-specific |
| Inspection & certificates | Project-specific |
Final configuration is matched to the project requirements before supply.
| Part | Material | Trademark |
|---|---|---|
| Main body | Project-specific | Source title does not state material |
| Float, screen and cover | Project-specific | Per project requirements |
The source title confirms the KS91A-121 designation and the 50A–80A nominal pipe-size range. It does not state the body material, float or screen construction, deck fixing, cover form or working pressure, so those details remain open for confirmation.
For a replacement, send the tank service, pipe size, deck arrangement and an old air-head photograph or drawing. We then check the connection, venting arrangement and inspection documents before quotation.
The photo shows a physical air pipe head with a bottom flange, bolted cover and visible 50A / FC / P7V06 casting marks. The source title lists the 50A-80A range; the photo alone depends on the full range or detailed configuration.
Check the tank service, pipe size, deck fixing, flange dimensions, internal float or screen arrangement, material grade and required inspection against the project requirements.
No. It indicates a cast-iron marking but depends on the exact grade. Check the body material and internal components from the project requirements.
The required inspection scope and documents are agreed for the actual order. The photo and legacy product title do not establish a product approval or certificate scope.