This JIS F7480 wafer-pattern butterfly valve page uses a real hydraulic-actuated reference photo. The source lists wafer and flanged connections separately; check the selected connection, DN, pressure class and materials against the project requirements.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7480-1996 |
| Type | Wafer-pattern butterfly valve; hydraulic remote operation shown in reference photo |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | Project-specific |
Final configuration is matched to the project requirements before supply.
| Part | Material | Trademark |
|---|---|---|
| Body | Project-specific | Per project requirements |
| Disc / stem | Project-specific | Per project requirements |
| Seat / seals | Project-specific | Per project requirements |
The source page identifies a marine JIS F7480 wafer-type hydraulic remote-control butterfly valve and separately lists wafer-type and flanged-type connection dimensions. The product photo shows a physical butterfly valve with a hydraulic actuator and a compact wafer-pattern body.
This image is a family-level appearance reference only. It depends on a specific DN, pressure rating, body/disc material, seat compound, actuator pressure or control interface. Check these details, counter-flange standard, face-to-face length and fail position from the project requirements.
The photo shows a physical butterfly valve with a hydraulic actuator and a wafer-pattern body. It does not confirm DN, pressure class, materials, seat compound or control details.
Send the project requirements or existing-valve photo and specify DN, pressure class, connection, medium, temperature, actuator/control requirements and required inspection documents.
The inspection scope, society and documents are agreed for the actual order. No society approval or certificate is claimed by this reference photo alone.
Only after DN, pressure class, flange drilling, face-to-face length and actuator/control requirements are matched against the project requirements.