This JIS F7480 lug-body butterfly valve reference shows an integral-lug body and worm-gear operator. Check the exact build against the vessel drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7480-1996 |
| Type | Lug-body butterfly valve; gear operated in reference photo |
| Nominal size | Project-specific |
| Pressure | Project-specific |
| Body material | Project-specific |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Grey cast iron / ductile iron | FC200 / FCD450 |
| Disc | Aluminium bronze / stainless | C95400 / SCS13 |
| Stem | Stainless steel | SUS403 / SUS410 |
| Seat | Rubber / PTFE | NBR / EPDM / PTFE |
The reference photo shows a physical butterfly valve with multiple integral lug ears and a handwheel gearbox. The source product page lists lug, wafer and double-flanged F7480 configurations, but does not assign the displayed image to a specific DN, pressure class or body material.
Before quotation, confirm DN, 5K/10K/16K rating, lug thread pattern, body and disc material, seat compound, face-to-face length and allowed end-of-line service from the project requirements.
No. It identifies the lug-body form and gear operator only. Confirm pressure, material and dimensions from the approved product drawing.
Send the vessel drawing or existing-valve photo and specify DN, flange class, lug thread, medium, temperature, seat material and operating method.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.