JIS F7475 is the cast steel angle air valve for larger shipboard air lines where a 90-degree route and dedicated air-service pattern are required.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7475-1996 |
| Type | Cast steel angle globe air valve, flanged |
| Nominal size | DN32–DN150 |
| Pressure | 46K catalogue class; confirm approved rating |
| Body material | Cast steel body and bonnet, stainless trim |
| Connection | Flanged, JIS pattern; verify class before quotation |
| Media | Starting air · control air · compatible gas service |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The angle pattern can remove a separate elbow from a larger starting-air or control-air branch. Public IMPA entries list individual DN codes, including DN32 through DN150, but the project requirements controls the final body dimensions.
Treat the 46K catalogue pressure as a reference until the buyer's pipe class and pressure-temperature schedule are confirmed. State the line medium, DN, flange class and inspection scope in the enquiry.
F7475 is angle-body; F7340 is straight-through. Both are dedicated cast-steel air-valve families but their installation dimensions differ.
No. Include the JIS model, DN, end connection, pressure schedule, medium and certificate requirement with the IMPA reference.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.