JIS F7474 is the cast steel 20K angle SDNR valve for high-pressure marine piping where a 90-degree route and combined stop/check duty are required.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7474-1996 |
| Type | Cast steel angle screw-down non-return (SDNR) |
| Nominal size | DN32–DN250 |
| Pressure | 20K (2.0 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
Forward flow lifts the guided disc and reverse flow closes it; the handwheel adds positive manual isolation. The angle body can simplify a high-pressure branch around machinery or bulkhead restrictions.
Public marine catalogues consistently pair F7474 with F7473 as the 20K angle/straight SDNR family. Confirm DN, flange drilling, guide style, trim, flow direction and class inspection before quotation.
F7474 is the angle pattern; F7473 is straight-through. Their pressure class and function are related, but their installation dimensions differ.
Public tables often publish the F7473 code family more clearly than F7474. Check the buyer's IMPA catalogue entry against the exact DN and model rather than inferring a code.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.