JIS F7473 is the cast steel 20K straight SDNR valve for higher-pressure marine lines that need both non-return and positive manual closure.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7473-1996 |
| Type | Cast steel straight screw-down non-return (SDNR) |
| Nominal size | DN32–DN250 |
| Pressure | 20K (2.0 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The straight body keeps the high-pressure line in line while the guided disc closes against reverse flow. The screw-down stem lets the operator isolate the line independently of flow direction.
Public catalogues agree on the F7473 20K designation, DN32–DN250 range and cast steel pressure boundary. Published dimensions and IMPA entries are not identical across every table, so the project requirements controls the order.
F7474 is the 20K angle SDNR pattern. It uses a 90-degree body and must be checked separately for face-to-face and height.
Public catalogues list steam, air or gas, fuel oil, lubricating oil and fresh water. Confirm temperature, pressure-temperature rating and trim for the actual medium.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.