JIS F7471 is the cast steel 10K SDNR valve: stop-and-check duty at 1.0 MPa with a steel pressure boundary, for boiler feed, compressed air and hot water lines where cast iron is not acceptable.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7471-1996 |
| Type | Screwdown check (SDNR), globe pattern |
| Nominal size | DN50–DN300 |
| Pressure | 10K (1.0 MPa) |
| Body material | SCPH2 cast steel body, stainless-faced disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
This is the pattern that replaces a separate globe valve plus check valve on a pump discharge: one body, one set of flanges, one isolation point. On a crowded manifold that saves both space and leak paths.
Steel body, stainless-faced disc and seat, packed stem. The stem thread is rolled and the gland is accessible from the top, so repacking can be done without disturbing the body joint.
Yes - an electric or pneumatic actuator can be fitted to the bonnet in place of the handwheel. Give us the torque and the ISO 5211 flange size and we match the mounting.
The valve is rated by the JIS F7400 family at up to 205 °C with the standard packing. For higher temperatures we fit graphite packing on request.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.