JIS F7418 is the bronze 16K angle lift check valve with union bonnet for compact marine branches requiring automatic non-return action.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7418-1996 |
| Type | Bronze angle lift check valve, union bonnet |
| Nominal size | DN15–DN40 |
| Pressure | 16K (1.6 MPa) |
| Body material | BC6 / tin bronze body, bonnet and lift disc |
| Connection | Flanged, JIS B2220 16K |
| Media | Sea water · fresh water · fuel oil · lubricating oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The angle body turns the small-bore line at the valve and the lift disc closes on reverse flow. The union bonnet gives access to the internal disc and seat for inspection.
Public listings pair F7418 with F7417 and identify a DN15–DN40 16K family. Check the exact face-to-centre dimensions, flange drilling, flow direction and installation orientation.
F7418 is angle-body; F7417 is straight-through. Both are bronze 16K union-bonnet lift check valves.
No. It is an automatic check valve. Use an SDNR or separate isolation valve when manual closure is required.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.