JIS F7414 is the bronze 16K union-bonnet angle SDNR valve for compact marine branches needing a pipe turn, non-return action and manual isolation.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7414-1996 |
| Type | Bronze angle SDNR valve, union bonnet |
| Nominal size | DN15–DN40 |
| Pressure | 16K (1.6 MPa) |
| Body material | BC6 / tin bronze body and disc, brass stem |
| Connection | Flanged, JIS B2220 16K |
| Media | Sea water · fresh water · fuel oil · lubricating oil · approved steam |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The angle body shortens a small-bore route around equipment, while the union bonnet permits service access. The guided disc closes automatically on reverse flow and the stem provides positive closure.
Public catalogue listings pair F7414 with F7413 and identify IMPA entries 751286–751290. Confirm face-to-centre length, flange drilling, flow direction and trim before replacement.
F7414 is angle-body; F7413 is straight-through. Both are bronze 16K union-bonnet SDNR patterns.
No. Include the JIS model, DN, flange class, flow direction and project requirements with the IMPA reference.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.