JIS F7412 is the bronze 5K angle SDNR valve for small marine branches that need a 90-degree route, automatic check action and manual closure.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7412-1996 |
| Type | Bronze angle screw-down non-return valve |
| Nominal size | DN15–DN40 |
| Pressure | 5K (0.5 MPa) |
| Body material | BC6 / tin bronze body and disc, brass stem |
| Connection | Flanged, JIS B2220 5K |
| Media | Sea water · fresh water · fuel oil · lubricating oil · approved steam |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The guided disc closes on reverse flow while the screw-down stem gives positive isolation. The angle body can remove a separate elbow from a compact auxiliary line.
Public catalogues identify F7412 as the 5K angle counterpart to F7411/F7413 families. Confirm DN, flange drilling, face-to-centre dimension, trim and installation orientation before quotation.
F7411 or the applicable straight SDNR family is selected when the pipe remains in line; check the exact standard on the existing valve.
Marine catalogues list water, oil, air and approved steam service. Confirm temperature, trim and pressure-temperature limits for the order.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.