JIS F7411 is the small-bore bronze 5K marine check valve for branch lines where reverse flow must be stopped without a handwheel-operated shut-off.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7411 |
| Type | Bronze marine check valve |
| Nominal size | DN15–DN40 |
| Pressure | 5K (0.5 MPa) |
| Body material | BC6 cast bronze body and cover |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The check function responds to flow direction without a separate operator. The bronze body is suited to compatible marine water service, subject to check of the actual medium and operating conditions.
This F7411 pattern is listed for small DN sizes; larger lines use other JIS check-valve families. Confirm whether the installed piping requires a swing, lift or screw-down type.
F7411 is a check valve without the screw-down stem function; F7351 is a bronze SDNR pattern with manual closure.
Check the JIS number, DN, pressure class, flow arrow, flange drilling and face-to-face length.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.