JIS F7410 is the bronze 16K angle SDNR valve for small marine branches requiring a 90-degree route, automatic check action and manual shut-off.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7410-1996 |
| Type | Bronze angle screw-down non-return valve |
| Nominal size | DN15–DN40 |
| Pressure | 16K (1.6 MPa) |
| Body material | BC6 / tin bronze body and disc, brass or bronze stem |
| Connection | Flanged, JIS B2220 16K |
| Media | Sea water · fresh water · fuel oil · lubricating oil · approved steam |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The angle body removes one elbow from a compact branch while the guided disc handles reverse flow and the stem provides positive closure. The product therefore differs from both a plain angle globe valve and a non-return-only valve.
Confirm flow direction, face-to-centre dimensions, flange drilling, handwheel access, trim and class inspection scope against the vessel drawing before quotation.
F7410 is the angle pattern; F7409 is straight-through. Both are bronze 16K SDNR families.
Public catalogues list water, oil, air and approved steam applications, but the actual temperature, trim and pressure-temperature limit must be checked for the order.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.