JIS F7388 is the compact bronze 20K globe valve for small-bore shipboard oil, air, gas and water branches.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7388 |
| Type | Small-bore S / U type globe valve |
| Nominal size | DN6–DN10 |
| Pressure | 20K |
| Body material | BC6 cast bronze body, brass disc and stem |
| Connection | S type screwed / U type union; tube OD to confirm |
| Media | Air · gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The small globe body gives a positive handwheel shut-off in places where a flanged valve would be too large. S and U connection patterns are listed for different pipe-removal and installation needs.
Public marine catalogues identify the F7388 20K family at DN6 and DN10, with pipe outside diameter and union details depending on the selected connection. Check the tube material, OD, thread and medium before ordering.
S type is the screwed small-bore pattern; U type uses a union arrangement. The exact pipe connection must match the installed line.
Confirm DN, pipe outside diameter, thread or union form, 20K rating, medium, temperature and required certificate package.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.