JIS F7387 is the compact 16K bronze marine cock for small-bore oil, gas and water lines, available in S type screwed and U type union patterns.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7387-1996 |
| Type | S type screwed / U type union cock |
| Nominal size | DN6–DN25 |
| Pressure | 16K |
| Body material | BC6 cast bronze body and plug |
| Connection | S type screwed / U type union |
| Media | Oil · gas · water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The plug turns through a quarter turn to isolate a small pipe without a handwheel or long bonnet. The S pattern uses a direct threaded connection; the U pattern adds a union connection where repeated removal is useful.
Public catalogues agree on the DN6–DN25 family and the 16K rating, while the exact pipe outside diameter and thread form must be matched to the vessel drawing before quotation.
S type is the screwed pattern; U type uses a union connection. Select the pattern from the installed pipe arrangement.
Confirm DN, pipe outside diameter, thread or union form, medium, pressure class and required material certificate.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.