JIS F7378 is the 16K cast-iron angle SDNR valve, combining a right-angle flow path with automatic check action and manual closure.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7378 |
| Type | Angle screw-down non-return (SDNR) |
| Nominal size | DN50–DN200 |
| Pressure | 16K (1.6 MPa) |
| Body material | FC200 cast iron body, bronze-faced disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The angle construction can simplify pipe routing while retaining the guided disc and screw-down stem of an SDNR valve. It is selected when both geometry and operating function match the line.
F7378 is the 16K angle pattern. Compare it with the 16K straight F7377 and the 10K angle F7376 using the actual flange drawing before procurement.
F7377 is the 16K straight SDNR valve; F7378 uses an angle body.
No. Check the standard, pressure class, flange drilling and face-to-face dimensions against the existing valve or project requirements.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.