JIS F7377 is the 16K cast-iron straight SDNR valve, for marine lines specifying the 16K flange class and combined stop/check duty.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7377 |
| Type | Straight screw-down non-return (SDNR) |
| Nominal size | DN50–DN200 |
| Pressure | 16K (1.6 MPa) |
| Body material | FC200 cast iron body, bronze-faced disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The non-return disc works automatically in forward service; the handwheel can close the valve for isolation. A straight body keeps the route in line with the pipe run.
This 16K pattern must not be treated as interchangeable with F7375 at 10K or F7353 at 5K. Confirm class, size and flange drilling from the pipe schedule.
F7377 is the 16K member; F7375 is 10K. Their pressure class and mating flange dimensions differ.
It combines a guided non-return disc with manual shut-off, often selected where both functions are required at one pipe connection.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.