JIS F7376 is the 10K cast-iron angle SDNR valve for marine pipework needing both a right-angle turn and manual non-return shut-off.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7376 |
| Type | Angle screw-down non-return (SDNR) |
| Nominal size | DN50–DN300 |
| Pressure | 10K (1.0 MPa) |
| Body material | FC200 cast iron body, bronze-faced disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The guided disc responds to forward and reverse flow, while the stem permits a crew member to close the valve by hand. Its angle body replaces a straight pattern where the piping turns.
The 10K rating and angle layout are both part of the selection. Check flange dimensions, flow direction and access to the handwheel on the installation drawing.
F7376 has an angle body; F7375 is straight-through. Both are 10K cast-iron SDNR patterns.
Installation orientation depends on the design and flow path. Follow the body marking and the approved vessel piping drawing.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.