JIS F7373 is the 10K swing check: same swing geometry as F7372, thicker flange and body to suit 1.0 MPa lines such as boiler feed, hot water and compressed air.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7373-1996 |
| Type | Swing check, bolted cover |
| Nominal size | DN50–DN300 |
| Pressure | 10K (1.0 MPa) |
| Body material | FC200 grey cast iron body, bronze disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The 10K flange is the visible difference - thicker, larger bolt circle, more bolts - and it is why an F7372 will not substitute for an F7373 on the same pipe. Everything inside the body stays the same: bronze disc, hinge pin in the cover.
On air and hot water service the disc is sometimes specified in stainless rather than bronze to avoid erosion at the seat; say which medium you are handling and we set the trim accordingly.
Rating is about the line design pressure including surge, not the pump's shut-off head. Follow what the pipe class says; changing rating mid-line creates a mismatch at the flanges.
No - fit a new one. We ship a spare gasket with every valve above DN100 for that reason.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.