JIS F7372 is the cast iron 5K swing check for DN50 to DN300 - the standard non-return on sea water, ballast and bilge mains where a full-bore disc keeps the pump head loss down.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7372-1996 |
| Type | Swing check, bolted cover |
| Nominal size | DN50–DN300 |
| Pressure | 5K (0.5 MPa) |
| Body material | FC200 grey cast iron body, bronze disc |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The disc hangs from a pin in the cover, above the bore, so the flow area is the pipe area. That is the reason swing checks are used on suction and transfer lines: a lift check in the same size would cost noticeably more head.
The hinge pin and disc are the only wearing parts and both come out with the cover. We supply replacement pins and discs so a yard can refurbish instead of replacing the body.
Typically about half, at the same DN, because the disc leaves the bore completely. If the pump curve is tight, that difference is the reason to pick swing.
It can on a long line. If water hammer is a concern, fit a bypass or ask for a lever-and-weight or damped version rather than a plain disc.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.