JIS F7371 is the small bronze swing check: a hinged disc that swings clear of a full bore, so it costs almost no pressure drop. Used on bilge, ballast and cooling branches up to DN50.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7371-1996 |
| Type | Swing check, bolted cover |
| Nominal size | DN15–DN50 |
| Pressure | 5K (0.5 MPa) |
| Body material | BC6 cast bronze body and cover |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
A swing check is chosen for head loss, not for shut-off quality. The disc lifts out of the flow path entirely, which is why it is the pattern on gravity and low-head lines where every kilopascal counts.
The trade-off is closing speed: the disc has a long travel and no spring, so on a fast pump stop it can slam. On small bronze sizes, where the disc is light, that is rarely a problem.
Only with flow upwards, and even then a lift check is the better choice - the disc needs gravity plus reverse flow to seat reliably.
At exactly DN50 both exist (F7371 bronze, F7372 cast iron). Bronze for sea water and small lines, cast iron where the price matters and the medium is not aggressive.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.