JIS F7368 is the bronze 10K rising-stem gate valve for small marine branches requiring full-bore isolation in the JIS 10K class.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7368-1996 |
| Type | Bronze rising-stem gate valve |
| Nominal size | DN15–DN40 |
| Pressure | 10K (1.0 MPa) |
| Body material | BC6 cast bronze body and bonnet, bronze or stainless disc |
| Connection | Flanged, JIS B2220 10K |
| Media | Sea water · fresh water · fuel oil · lubricating oil · air or gas |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The wedge lifts clear of the bore when open, keeping pressure loss low on small water, oil and air branches. The rising stem shows valve position and keeps its thread away from the medium.
Two public technical pages agree on the DN15–DN40 F7368 family and IMPA entries 750961–750965. Check the disc/seat class, flange drilling and operating clearance before ordering.
JIS F7367 is the bronze 5K rising-stem gate family. Do not substitute without matching the flange class.
No. Keep a gate valve fully open or fully shut; use a globe or butterfly valve for regulation.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.