JIS F7367 is the small bronze rising-stem gate valve for DN15 to DN50 branches, where a full-bore isolation valve is wanted and the bronze body suits the medium without a coating.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7367-1996 |
| Type | Gate, rising stem, bolted bonnet |
| Nominal size | DN15–DN50 |
| Pressure | 5K (0.5 MPa) |
| Body material | BC6 cast bronze body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
Small gate valves survive in places where a butterfly will not fit and a globe would throttle the line: gauge boards, small cooling branches, drain and vent headers. Bronze keeps the body workable at that size.
The rising stem makes the position obvious in a tight space, which is often the deciding factor on a gauge board where nobody wants to guess.
Gate if you only need isolation and want minimum pressure drop. Globe if you need to throttle or if the line has to be shut tight against a small flow - a gate disc can wire-draw.
Brass (C3771) on the standard build, bronze on request for higher temperature service.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.