JIS F7366 is the cast steel 10K gate valve: same duty as F7364 but with a steel pressure boundary, for cargo oil, deck lines and any service where the class society requires impact-tested material.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7366-1996 |
| Type | Gate, rising stem, bolted bonnet |
| Nominal size | DN50–DN300 |
| Pressure | 10K (1.0 MPa) |
| Body material | SCPH2 cast steel body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
Cast steel is specified for ductility and for weldability of the body, not for pressure - at 10K the rating is modest. On a tanker or a deck line, iron is simply not accepted.
The seat faces are stainless overlaid, so the valve tolerates slightly more aggressive media than the iron version and can be re-faced rather than replaced if worn.
Yes - CCS, LR, BV, ABS, DNV or ZC, issued against the casting heat number. On tanker deck service this is normally mandatory.
Above about DN200 the handwheel torque becomes uncomfortable; we fit a bevel gear or an electric actuator on the same bonnet flange.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.