• JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve) - DN50-DN300,TAILCN Marine Valves,JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve)
  • JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve) - DN50-DN300,TAILCN Marine Valves,JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve)

JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve) - DN50-DN300

No.JIS F7365-1996
Hull (sea) globe valve, bolted bonnet to JIS F7365-1996, SCPH2 cast steel body, bronze-faced disc, DN50-DN300, 5K (0.5 MPa), Made in Wenzhou, China.
  • JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve) - DN50-DN300,TAILCN Marine Valves,JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve)
  • JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve) - DN50-DN300,TAILCN Marine Valves,JIS F7365 Hull Cast Steel 5K Globe Valve (Sea Valve)

Description

JIS F7365-1996 · Marine sea valve

JIS F7365 is the cast steel hull valve for main sea water suctions from DN50 upwards, where the body has to be steel because of size and because the class society treats a large shell penetration as a primary boundary.

01 · Product details

Product details

Key information for selection. Send your drawing or nameplate photo for an exact match.

ItemValue
StandardJIS F7365-1996
TypeHull (sea) globe valve, bolted bonnet
Nominal sizeDN50–DN300
Pressure5K (0.5 MPa)
Body materialSCPH2 cast steel body, bronze-faced disc
ConnectionFlanged, both ends
MediaSea water · fresh water · fuel oil
Inspection & certificatesCCS · LR · BV · ABS · DNV · ZC

Materials of main parts

PartMaterialTrademark
Body, bonnetCast steelSCPH2 / WCB
Disc, seatStainless steel overlaySCS2 / 2Cr13
StemStainless steelSUS403
GasketSpiral wound / non-asbestos—
02 · Overview

Product overview

Large hull valves are not scaled-up bronze valves: the body is a steel casting with a machined spigot that passes through the shell, and the internal surfaces are coated against sea water. The disc and seat are bronze or stainless so the sealing faces survive.

Face-to-face and flange drilling follow JIS B2220 5K, but the body outline is set by the sea chest or the shell detail - which is why we quote these against a drawing rather than a catalogue number.

CARGO SHIPTANKERTUGFISHING VESSELNAVAL AUXILIARYOFFSHORE SUPPLY
03 · Buyer information

Frequently asked questions

How do I specify a hull valve without a drawing?

Give us the DN, the rating, the shell plate thickness, the distance from the shell to the operating handwheel and the class requirement. From that we can propose a body form for your approval before casting.

Is a strainer needed on the sea side?

Yes on main engine cooling: a sea chest strainer or a strum box ahead of the hull valve keeps debris off the seat. We supply those as a separate item.

Can it be supplied with a classification society certificate?

Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.

Can it replace a part built to another standard?

Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.

What do you need from me to quote?

Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.