JIS F7364 is the 10K cast iron gate valve for boiler feed, hot water and compressed air mains at up to 1.0 MPa, where a 5K body would be under-rated but the medium still allows cast iron.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7364-1996 |
| Type | Gate, rising stem, bolted bonnet |
| Nominal size | DN50–DN300 |
| Pressure | 10K (1.0 MPa) |
| Body material | FC200 grey cast iron body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The 10K body is visibly heavier: thicker flange, more bolts, larger bolt circle. It will not substitute for an F7363 on an existing pipe, and vice versa - always match the rating the line was designed to.
Internally the wedge, stem and bonnet joint are the same family, so a yard that stocks both ratings only needs one set of handwheels and packing sizes.
The flanges will not line up - bolt circle and thickness differ. Rating must match the pipe class; going up a rating does not make the joint safer, it makes it unboltable.
DN300 is the practical limit for 10K grey iron; above that the casting gets too heavy and the cast steel F7366 takes over.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.