JIS F7363 is the cast iron 5K gate valve that most JIS-built engine rooms still use for sea water, ballast and cargo isolation: straight bore, solid wedge, rising stem showing open or closed at a glance.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7363-1996 |
| Type | Gate, rising stem, bolted bonnet |
| Nominal size | DN50–DN600 |
| Pressure | 5K (0.5 MPa) |
| Body material | FC200 grey cast iron body and bonnet |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
A gate valve is chosen for one reason - when fully open the bore is clear and the pressure drop is close to that of the pipe. That still beats a butterfly on gravity and low-head lines, and it is why gate valves have not disappeared from ship piping.
The rising stem is also a safety feature: the position is visible without looking at an indicator. The trade-off is height - a DN300 gate needs as much room above the bonnet as the valve is tall. IMPA codes run 750801 to 750815 from DN50 to DN600.
Rising stem shows position and keeps the stem thread out of the medium. Non-rising needs less headroom. For engine room use this range is supplied rising stem as standard.
No. A part-open gate disc chatters against its guides and erodes the seat. Use a globe valve or a butterfly for regulation and keep the gate for isolation.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.