JIS F7358 is the cast-iron 5K lift check globe valve for larger marine lines where a guided automatic non-return disc is required.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7358-1996 |
| Type | Cast iron lift check globe valve |
| Nominal size | DN50–DN300 |
| Pressure | 5K (0.5 MPa) |
| Body material | FC200 cast iron body, bronze-faced guided disc |
| Connection | Flanged, JIS B2220 5K |
| Media | Fresh water · ballast water · fuel oil · lubricating oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The guided disc lifts under forward pressure and closes against reverse flow. Its globe-type body differs from a hinged swing check and must be selected with the required flow direction and pressure loss in mind.
Public JIS lists identify F7358 as the cast-iron 5K lift-check family. Confirm DN, orientation, disc facing, flange drilling and class documentation before ordering.
JIS F7359 is the cast-iron 5K lift-check angle pattern.
Lift check uses guided vertical disc travel; swing check uses a hinged disc. Choose by flow, orientation, pressure loss and drawing.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.