This JIS F7356 bronze lift-check reference page uses a real product photograph visibly marked 5K25. The photo supports the shown body form and marking only; check the ordered valve configuration against the project requirements.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7356-1996 |
| Type | Bronze-colored flanged lift check valve; photo marked 5K25 |
| Nominal size | DN25 indicated by visible 5K25 marking; range to drawing confirmation |
| Pressure | 5K shown; exact class scope by project requirements |
| Body material | Bronze-colored body shown; alloy grade and internal materials project-specific |
| Connection | Flanged, both ends |
| Media | Sea water · fresh water · fuel oil |
| Inspection & certificates | Project-specific |
Final configuration is matched to the project requirements before supply.
| Part | Material | Trademark |
|---|---|---|
| Body and cover | Project-specific | Per project requirements |
| Disc / plug / stem | Project-specific | Per project requirements |
| Gasket and seat | Project-specific | Per project requirements |
The Safe Marine product page identifies the item as a JIS F7356 bronze 5K lift check valve. Its product image shows a bronze-colored flanged body with a visible 5K25 casting mark.
The visible mark is evidence for the photographed 5K25 item only. The image depends on the exact alloy, internal disc and seat materials, dimensions beyond the marking, test records or the available product-family range. Check these details and the flange drilling against the project requirements.
It shows a real bronze-colored flanged lift-check valve and a visible 5K25 marking. It does not check the exact alloy, internal construction or wider size range.
Send the project requirements or old-valve photo and specify the required DN, pressure class, flange dimensions, medium, temperature and inspection documents.
The required inspection scope and documents are agreed for the actual order. This reference photo alone depends on any product approval or certificate scope.
Only after size, pressure class, flange drilling, face-to-face length and service requirements are matched to the project requirements.