JIS F7352 5K is the bronze right-angle stop-check valve shown in Taler's customer product catalogue. It combines a right-angle marine valve body with stop and non-return service; the final connection and trim must follow the buyer's drawing.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7352 |
| Type | Right-angle stop-check valve |
| Nominal size | Project-specific |
| Pressure | 5K |
| Body material | Bronze body; exact grade project-specific |
| Connection | Project-specific |
| Media | Marine fluid service; medium and temperature project-specific |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body | Bronze | Exact grade project-specific |
| Disc, stem and seat | Project-specific | Per project requirements |
The source product title confirms the JIS F7352 family, 5K class and bronze construction. Because the source page does not state the nominal size, flange drilling or detailed trim, those fields remain open rather than being inferred from the photograph.
Send the existing valve photo, nameplate or project requirements with the enquiry. We then match the body orientation, mating connection, pressure class and inspection documents before quotation.
The source identifies a stop-check pattern: the valve is selected for a combined shut-off and non-return duty. Check the exact internal arrangement and flow direction against the project requirements.
State the nominal size, end connection, flange drilling, medium, temperature, trim and required inspection documents. The source title alone does not confirm those fields.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.