JIS F7349 is the bronze 16K union-bonnet angle valve for higher-pressure marine branches where the pipe route turns at the valve.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7349-1996 |
| Type | Bronze angle valve, union bonnet |
| Nominal size | DN15–DN40 |
| Pressure | 16K (1.6 MPa) |
| Body material | BC6 / tin bronze body and disc, brass or bronze stem |
| Connection | Flanged, JIS B2220 16K |
| Media | Sea water · fresh water · fuel oil · lubricating oil · approved steam |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The angle body reduces fittings in a compact route, while the union bonnet keeps the stem and disc assembly serviceable. The 16K class must be matched to the mating flange rather than treated as a drop-in upgrade.
Check the original standard, DN, flange drilling, face-to-centre length, flow direction, temperature and inspection documents before replacement.
F7349 is angle-body; F7348 is straight-through. Both are 16K bronze union-bonnet globe families.
No. Pressure class, DN, flange pattern, trim and operating conditions still control whether the selected valve fits and is suitable.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.