JIS F7347 is the bronze 5K union-bonnet angle valve for compact marine branches needing a 90-degree route and maintainable trim.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7347-1996 |
| Type | Bronze angle valve, union bonnet |
| Nominal size | DN15–DN40 |
| Pressure | 5K (0.5 MPa) |
| Body material | BC6 / tin bronze body and disc, brass or bronze stem |
| Connection | Flanged, JIS B2220 5K |
| Media | Sea water · fresh water · fuel oil · lubricating oil · approved steam |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The angle pattern combines the pipe turn and the valve in one casting, while the union bonnet gives access to the stem and disc assembly. This is a different replacement choice from F7346 even though the pressure class is shared.
Confirm flow direction, face-to-centre dimensions, flange drilling, bonnet clearance and the required material or class documents against the vessel drawing.
Both are bronze angle families, but F7347 is the union-bonnet pattern. Use the original standard and drawing to check the replacement.
Approved steam service depends on temperature, packing and trim. State the actual steam condition before quotation.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.