JIS F7346 is the bronze 5K union-bonnet globe valve for small marine branches where bonnet and stem access matters during maintenance.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7346-1996 |
| Type | Bronze straight globe valve, union bonnet |
| Nominal size | DN15–DN40 |
| Pressure | 5K (0.5 MPa) |
| Body material | BC6 / tin bronze body, bonnet and disc; brass or bronze stem |
| Connection | Flanged, JIS B2220 5K |
| Media | Sea water · fresh water · fuel oil · lubricating oil · approved steam |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast bronze | BC6 (CAC406) |
| Disc | Cast bronze | BC6 |
| Stem | Brass / stainless steel | C3771 / SUS403 |
| Seat | Integral bronze | — |
The union-bonnet joint gives a distinct service arrangement from the ordinary bolted or screwed bonnet families. It is used for manual isolation and throttling on water, air, oil and approved steam branches.
Public listings agree on the 5K DN15–DN40 family. Check the flange drilling, bonnet material, stem alloy, gasket, temperature and class inspection before quotation.
It provides a serviceable bonnet and stem assembly suited to repeated inspection. It does not make the valve interchangeable with every bronze 5K globe pattern.
JIS F7347 is the 5K union-bonnet angle valve. Choose it for a 90-degree pipe route.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.