JIS F7340 is the cast steel flanged globe air valve for larger shipboard air lines, with published IMPA entries from DN32 through DN150.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7340-1996 |
| Type | Cast steel straight globe air valve, flanged |
| Nominal size | DN32–DN150 |
| Pressure | 46K catalogue class; confirm approved rating |
| Body material | Cast steel body and bonnet, stainless trim |
| Connection | Flanged, JIS pattern; verify class before quotation |
| Media | Starting air · control air · compatible gas service |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The cast-steel body extends the dedicated air-valve family beyond the small forged patterns. Flanged entries are listed by DN in public IMPA catalogues, making this a separate RFQ path for larger air systems.
The 46K figure is a catalogue reference and must not replace the approved pressure-temperature schedule. Check the actual rating, flange drilling, trim, packing and inspection requirement before supply.
JIS F7475 is the cast steel angle air-valve family. Choose it when the pipe route requires the 90-degree body.
Do not assume so. Air-valve trim, pressure-temperature limits and packing must be checked against the actual medium and project requirements.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.