JIS F7337 is the forged steel angle air valve for compact high-pressure shipboard air branches where the connection must turn at the valve.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7337-1996 |
| Type | Forged steel angle air valve |
| Nominal size | DN6–DN25 |
| Pressure | 40K (4.0 MPa nominal class) |
| Body material | Forged steel body, stainless trim |
| Connection | Project-specific |
| Media | Starting air · control air · compatible gas service |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
A 90-degree air-valve body can simplify routing around a bulkhead or instrument panel while retaining a positive handwheel shut-off. End form remains a separate selection because IMPA lists union, socket-weld and flanged variants.
Use the vessel drawing to confirm flow direction, thread, weld preparation, tube OD, handwheel clearance and the required class inspection package.
F7337 is the angle pattern; F7336 is straight-through. Select by geometry and check the connection code.
State working pressure, test basis, temperature, medium and the required 40K or catalogue pressure designation before quotation.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.