JIS F7336 is the forged steel globe air valve for compact high-pressure shipboard air branches and instrument connections.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7336-1996 |
| Type | Forged steel straight globe air valve |
| Nominal size | DN6–DN25 |
| Pressure | 40K (4.0 MPa nominal class) |
| Body material | Forged steel body, stainless trim |
| Connection | Project-specific |
| Media | Starting air · control air · compatible gas service |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The air-valve pattern is a dedicated procurement family rather than a generic globe page: connection details and small-bore IMPA entries vary by whether the line uses union nut, thread or flange ends.
Public IMPA catalogues identify the F7336 family at 46 kgf/cm2 catalogue pressure. Check the actual JIS class, end form, DN, tube OD and pressure-test documents before ordering.
JIS F7337 is the forged steel angle air-valve family. Choose it when the air line needs a 90-degree turn at the valve.
It can be applied to compatible marine air or gas branches. State the system pressure, temperature and air quality so the trim and packing can be confirmed.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.