JIS F7330 is the forged steel 40K angle valve for compact high-pressure marine branches where the pipe route must turn at the valve.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7330-1996 |
| Type | Forged steel angle valve |
| Nominal size | DN6–DN25 |
| Pressure | 40K (4.0 MPa nominal class) |
| Body material | Forged steel body, stainless trim |
| Connection | Project-specific |
| Media | Steam · air or gas · fuel oil · lubricating oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The angle body saves a separate elbow around gauges, burners and auxiliary machinery. IMPA records separate screwed, socket-weld and flanged entries, so the end connection is a primary purchasing field.
The standard family covers small sizes and the exact DN coverage depends on the connection type. Confirm thread, weld preparation, flange drilling and handwheel access against the project requirements.
JIS F7329 is the related forged steel 40K straight globe family. F7330 is chosen for the 90-degree pipe route.
Those media appear in marine catalogue descriptions, but temperature, pressure, packing and trim must be confirmed for the actual service.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.