JIS F7329 is the forged steel 40K marine globe valve for compact high-pressure branches, available in the connection patterns used by the buyer's piping system.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7329-1996 |
| Type | Forged steel straight globe valve |
| Nominal size | DN15–DN25 |
| Pressure | 40K (4.0 MPa nominal class) |
| Body material | Forged steel body, stainless trim |
| Connection | Project-specific |
| Media | Steam · air or gas · fuel oil · lubricating oil |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
Forged construction is suited to small high-pressure valves where a compact pressure boundary is more useful than a large cast body. IMPA listings distinguish flange, socket-weld and screwed end patterns, so the connection cannot be left implicit.
Public catalogue entries identify DN15, DN20 and DN25 flange and socket-weld variants. Confirm end type, thread or weld preparation, face-to-face length and trim before quotation.
Public IMPA listings show flanged and socket-weld entries, while some catalogues also list screwed ends. Select the exact pattern from the piping drawing.
No. F7329 is a small forged-steel 40K family; F7317 is a larger cast-steel 40K straight globe family.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.