JIS F7323 is the 16K straight globe valve in ductile or cast iron for higher-pressure marine branch piping in the DN15–DN40 range.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7323-1996 |
| Type | Straight globe valve, rising stem |
| Nominal size | DN15–DN40 |
| Pressure | 16K (1.6 MPa) |
| Body material | FCD400 ductile iron or FC200 cast iron body, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Fresh water · air or gas · fuel oil · lubricating oil · steam up to the approved temperature |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The 16K flange and pressure boundary are intended for higher-pressure service than the related 5K F7321 family. The globe disc provides manual isolation and controlled flow adjustment.
Public catalogues agree on DN15–DN40, JIS B2220-16K flanges and the F7323 designation. Check the body class, trim, temperature and hydraulic test documents for the actual order.
Not as a direct assumption. The pressure class, flange drilling and face-to-face dimensions must match the pipe system.
F7324 is the 16K angle globe pattern in the same small-size family.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.