JIS F7322 is the small 5K angle globe valve in ductile or cast iron, combining manual control with a 90-degree change of direction.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7322-1996 |
| Type | Angle globe valve, rising stem |
| Nominal size | DN15–DN40 |
| Pressure | 5K (0.5 MPa) |
| Body material | FCD400 ductile iron or FC200 cast iron body, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Fresh water · air or gas · fuel oil · lubricating oil · steam up to the approved temperature |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The angle body can reduce the need for a separate elbow in compact marine branch piping. Like the straight pattern, it uses a rising stem and handwheel for controlled manual operation.
Two public dimension tables agree on the DN15–DN40 family, with the angle face-to-face dimension different from F7321. Match the installed piping geometry, flange drilling and trim class before replacement.
F7322 uses an angle body; F7321 is straight-through. Their face-to-face dimensions and pipe routing are different.
Public catalogues list ductile iron or cast iron body classes with bronze or stainless trim. Check the class in the purchase specification.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.