JIS F7321 is the small 5K straight globe valve in ductile or cast iron, used for manual isolation and throttling on marine branch lines.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7321-1996 |
| Type | Straight globe valve, rising stem |
| Nominal size | DN15–DN40 |
| Pressure | 5K (0.5 MPa) |
| Body material | FCD400 ductile iron or FC200 cast iron body, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Fresh water · air or gas · fuel oil · lubricating oil · steam up to the approved temperature |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Grey cast iron | FC200 |
| Disc | Cast iron with bronze face | FC200 / BC6 |
| Stem | Brass | C3771 |
| Gland packing | Non-asbestos / PTFE | — |
The globe body guides the disc onto the seat and gives the operator controlled closure rather than the low-loss full-bore action of a gate valve. The compact DN15–DN40 range suits auxiliary and instrument branches.
Public dimension tables agree on the DN15–DN40 family and JIS 5K flange pattern. Class B/Class S materials and the final trim should be selected from the approved piping specification.
F7321 is the straight globe pattern. The C suffix identifies the screw-down non-return variant in related catalogues.
A globe valve is suited to controlled opening and closing, but the allowable throttling duty and medium should be confirmed for the system.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.