JIS F7320 is the cast steel 10K angle globe valve for larger marine lines where isolation, throttling and a 90-degree pipe turn are required together.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7320-1996 |
| Type | Cast steel angle globe valve, bolted bonnet |
| Nominal size | DN50–DN300 |
| Pressure | 10K (1.0 MPa nominal class) |
| Body material | SC480 / cast steel body and bonnet, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water · selected seawater service |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The angle body can remove a separate elbow from a crowded engine-room route. It is used on steam, fuel-oil, lubricating-oil, feed-water and auxiliary service lines when the pressure-temperature rating and trim are correctly selected.
Public catalogues agree on the F7320 standard, JIS 10K flanges and DN50–DN300 range. Confirm flow direction, handwheel clearance, face-to-face length, trim and class documentation from the supplier drawing.
F7320 is the angle pattern; F7319 is straight-through. The pressure class is the same, but the piping geometry and dimensions are not interchangeable.
Some catalogues list seawater with suitable trim such as bronze or approved corrosion-resistant materials. Check the actual trim, temperature and class requirement before quotation.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.