JIS F7319 is the cast steel 10K straight globe valve for larger marine steam, oil, air and service-water lines.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7319-1996 |
| Type | Cast steel straight globe valve, bolted bonnet |
| Nominal size | DN50–DN300 |
| Pressure | 10K (1.0 MPa nominal class) |
| Body material | SC480 / cast steel body and bonnet, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The straight cast steel body provides a robust pressure boundary for DN50–DN300 pipework, while the globe disc supports manual isolation and controlled flow adjustment. Bronze or stainless trim can be selected to suit the medium.
Public catalogues agree on the F7319 10K family and DN50–DN300 range. Some supplier tables differ in face-to-face and weight values, so the approved dimensional drawing must control the replacement or new-build order.
F7320 is the related 10K angle globe valve. Use it where a 90-degree flow turn is required in the piping layout.
Public catalogues commonly state body 2.10 MPa and seat 1.54 MPa for the 10K pattern; verify the selected maker's test certificate and standard revision.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.