JIS F7318 is the cast steel 40K angle globe valve for high-pressure marine piping where a 90-degree route and controlled shut-off are required.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7318-1996 |
| Type | Cast steel angle globe valve, bolted bonnet |
| Nominal size | DN25–DN150 |
| Pressure | 40K (4.0 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, stainless or bronze trim |
| Connection | Flanged, JIS B2220 40K |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The angle body combines a flow turn with the globe valve's manual regulation function, which can shorten a high-pressure branch around equipment or a bulkhead.
F7318 is the angle member of the 40K F7317/F7318 family. Final flange drilling, face-to-face length, flow direction and operating clearance must follow the project requirements.
F7318 is the angle pattern; F7317 is straight-through. Both are 40K cast-steel globe valves.
State JIS F7318, DN, 40K, medium, temperature, trim, end connection and any class inspection or material certificate requirement.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.