JIS F7317 is the cast steel 40K straight globe valve for high-pressure marine branches where a compact, maintainable shut-off and throttling valve is required.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7317-1996 |
| Type | Cast steel straight globe valve, bolted bonnet |
| Nominal size | DN25–DN150 |
| Pressure | 40K (4.0 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, stainless or bronze trim |
| Connection | Flanged, JIS B2220 40K |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The straight flow path suits pressure lines that must remain aligned through the valve. It is positioned separately from F7315 because 40K flange drilling, wall thickness and pressure-temperature limits are different.
The public standard designation is well established, while supplier size lists differ. Confirm DN, end pattern, seat trim, packing and required hydraulic test basis before placing the order.
JIS F7318 is the 40K angle pattern. Select it by pipe routing, not simply by pressure class.
Public marine catalogues list steam among possible media, but the allowable pressure and temperature must be confirmed for the selected material and trim.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.