JIS F7316 is the cast steel 30K angle globe valve for high-pressure marine pipework where isolation, throttling and a 90-degree turn are needed together.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7316-1996 |
| Type | Cast steel angle globe valve, bolted bonnet |
| Nominal size | DN50–DN250 |
| Pressure | 30K (3.0 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, stainless or bronze trim |
| Connection | Flanged, JIS B2220 30K |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
An angle body can remove a separate elbow from a compact machinery-space branch. The cast-steel pressure boundary is intended for demanding service, but the actual medium, temperature and trim remain part of the selection.
Published catalogue data identifies F7316 as the 30K angle counterpart to F7315. Confirm flow direction, handwheel clearance, flange drilling and face-to-face dimensions from the project requirements.
F7316 is angle pattern; F7315 is straight-through. The pressure class is shared but the installation geometry is not.
No. Use the selected supplier's project requirements for final dimensions, weight, trim and class inspection requirements.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.