JIS F7314 is the cast steel 20K angle globe valve for high-pressure marine pipework where the valve must also turn the flow by 90 degrees.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7314-1996 |
| Type | Cast steel angle globe valve, bolted bonnet |
| Nominal size | DN32–DN250 |
| Pressure | 20K (2.0 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The angle pattern can replace a separate elbow and straight globe valve in a machinery-space branch. The cast steel pressure boundary and renewable trim suit demanding steam, oil, air and water service when the pressure-temperature selection is correct.
Public catalogues agree on DN32–DN250, JIS 20K flanges and the F7314 designation, while dimensional tables differ slightly between suppliers. Check the project requirements, flow direction, handwheel clearance and class inspection scope.
F7313 is the straight pattern; F7314 is the angle pattern. Choose by pipe routing and match the face-to-face and height dimensions.
No. They are catalogue references. Use the selected supplier's project requirements for flange drilling, face-to-face, height and weight before purchase.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.