JIS F7313 is the cast steel 20K straight globe valve for higher-pressure marine steam, oil, air and water lines.
Key information for selection. Send your drawing or nameplate photo for an exact match.
| Item | Value |
|---|---|
| Standard | JIS F7313-1996 |
| Type | Cast steel straight globe valve, bolted bonnet |
| Nominal size | DN32–DN250 |
| Pressure | 20K (2.0 MPa nominal class) |
| Body material | SC450 / cast steel body and bonnet, bronze or stainless trim |
| Connection | Flanged, both ends |
| Media | Steam · air or gas · fuel oil · lubricating oil · fresh water |
| Inspection & certificates | CCS · LR · BV · ABS · DNV · ZC |
| Part | Material | Trademark |
|---|---|---|
| Body, bonnet | Cast steel | SCPH2 / WCB |
| Disc, seat | Stainless steel overlay | SCS2 / 2Cr13 |
| Stem | Stainless steel | SUS403 |
| Gasket | Spiral wound / non-asbestos | — |
The straight pattern keeps the pipe route in line while the globe disc provides manual isolation and controlled flow adjustment. Cast steel construction is used where the line duty exceeds the normal cast-iron family.
Three independent public catalogues agree on the F7313 20K designation, DN32–DN250 range and JIS B2220 flange family. Confirm temperature, trim grade, face-to-face length and class documentation for the actual order.
F7314 is the 20K angle globe valve. It has a 90-degree body and different face-to-face and height dimensions.
Public catalogues list steam service with pressure-temperature limits. Check the actual temperature, allowable working pressure, packing and class requirements before selection.
Yes. CCS, LR, BV, ABS, DNV and ZC inspection can be arranged before dispatch, and the certificate is issued against the actual heat number of the casting. State the society and the surveyor's requirements on the enquiry so it is included in the quotation rather than added later.
Our production follows the Chinese national (GB/CB) standards and customer drawings. If the part you are replacing follows JIS, DIN, EN or an IMPA-coded pattern, send the drawing or the flange dimensions: where the bolt circle, bolt count and face-to-face match a GB/CB type, we supply that type. Where they do not, we say so before quoting rather than after.
Five things decide the price: the standard number or the drawing, the DN size, the body material, the quantity, and whether a classification society certificate is required. A photo of the nameplate or the old valve is usually enough for us to identify the rest. Delivery port and required date help, but they are not needed for the first reply.